AVer DL30 Manuel D'utilisation page 30

Presenter
Select the "Presenter" tab in Tracking Settings interface.
Camera will start tracking when object enters the tracking point.
1. Use ,
2. Then, select Save to Preset 1 to save the tracking point.
3. Tracking Sensitivity: sets the sensitive level of tracking. Move bar to set the value. The current
value is displayed at upper right corner.
4. Time of Return to Tracking Point: sets the idle time for camera return to tracking point. Move bar
to set the value. The current value is displayed at upper right corner.
5. People Size: selects the people in full or upper body while tracking.
[Note] Tracking point under presenter mode: default set is preset 1. When preset 1 is not set,
tracking point is home position.
6. Effect Tracking Area: When Effective Tracking Area function is on, camera only tracks around the
selected area. Check the box to turn on the Effective Tracking Area function then click Set to
configure the targeted area in the live view. Move the upper left corner and the lower right corner of
the red solid frame to define the targeted area.
, , , and to adjust the camera to tracking point.
21