AVer DL30 Manuel D'utilisation page 41

FAQ
1. Can I pan, tilt, zoom, and set preset point when tracking is on?
Yes, but tracking will be off when activating pan/tilt/zoom or go to preset point.
2. Any value will be auto saved and shifted when going to the preset point?
Yes, preset point value: PTZ, exposure, shutter, iris, ev, brightness, gain, slow shutter, white
balance, focus, focus position, digital zoom, R&B gain.
3. What value will be saved in profile?
Profile saving value: 1) preset setting values, 2) tracking mode, and 3) tracking setting values.
4. How to switch from Zone mode to Presenter mode?
You may switch to Presenter mode by simply pressing Upper or Full button on your remote
control.
5. Where can I configure the Hybrid Mode?
You can access the camera Web user interface to configure the Hybrid Mode. The Hybrid Mode
is not supported by the remote control.
6. What should I pay attention to when configuring the Effective Tracking Area under the Hybrid
Mode?
Effective Tracking Area defines where the presenter is tracked. When configuring the Effective
Tracking Area, include the preset point zone (Preset 10-13) as well.
32