Using The Appliance - Moulinex PC600G31 Mode D'emploi

DESCRIPTION
A Motor unit
B
Connecting rod
C Pouring spout
D
Transparent bowl
E
Stainless steel filter
F
Cone
G Protective cover

USING THE APPLIANCE

Before using the appliance for the
first time, wash the parts which will
be in contact with food.
– Cut the citrus fruits in half.
– Plug in your appliance;
– Place a glass under the pouring
spout (C).
– Please ensure that the pouring
spout is correctly positioned
(down position) (fig. 1)
CLEANING
– Once you have unpacked your
appliance and before using it for
the first time, clean all parts.
– Clean the motor unit (A) with a
damp cloth.
– Do not immerse the appliance
in water.
– All the other parts (transparent
bowl (D), stainless steel filter (E),
cone (F) and protective cover
(G) can be washed under the
tap or in a dishwasher (upper
tray) (fig. 4, fig. 5).
– Remove the protective cover
(G) and gently press the cut fruit
onto the cone (F) (fig. 2); this will
start the appliance.
– When the fruit is no longer in
contact with the cone the
appliance will stop automatically.
You may hear a slight noise when
the applicant stops, this is quite
normal.
– Never operate the juice extractor
for more than 10 minutes at a
time, without stopping.
– After use, immediately clean the
various parts under the tap or
in a dishwasher so that the pulp
doesn't remain stuck on them.
– Never use bleach or an abrasive
sponge.
EN
3