Publicité
Les langues disponibles
Les langues disponibles
Reception of the radio controlled time signal (DCF77)
The weather station will enter radio controlled time mode after receiving outdoor temperature for 3 minutes.
At 1:00 /2:00 / 3:00 AM every day, the clock automatically carries out the synchronization procedure with the DCF77 signal to correct any
deviations to the exact time, If this synchronization attempt is unsuccessful, the radio mast icon disappears from the display, the system will
automatically attempt another synchronization at the next full one hour, This procedure is repeated automatically up to total 5 times.
To manually start the DCF77 signal reception, press and hold the B3 button
for 3 seconds. If no signals is received within 7 minutes, then the
DCF77 signal search stops and start again at the next full one hour.
To stop the signal search during DCF77 reception, press the B3 button
once.
Notes:
A flashing radio mast icon indicates that the DCF signal reception has started
A continuously displayed radio mast icon indicates that the DCF signal was received successfully
We recommend a minimum distance of 2.5 meters to all sources of interference, such as televisions or computer monitors
Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In such circumstances, place the system close to the
window.
During the DCF77 reception mode, only the B3 button
is functional, other buttons are not functional, If you want to carry out other
functions of operation, please press the B3 button
to exit the DCF77 reception mode.
Manual time setting
Press and hold the B5 button
for 3 seconds, the "ON/OFF
"display starts to flash. Now use "
" or "
" buttons to set the radio
control function ON or OFF.
Press the SET button to confirm the item has been set and go to the next one, the sequence of setting items is as follows:
RCC ON/OFF TIME format(12/24HR) ZONE(-12~12) HOUR MINUTE DATE format(D/M or M/D) YEAR MONTH DATE
Language of week Unit of temperature(°C/°F) Pattern of weather Complete setup and exit the setting mode
When adjusting the value, you can add or subtract 1 by pressing
or
button once, and quickly add or subtract by pressing and hold it.
Weekday language settings are shown in the table below:
EN3
Publicité
