Cleaning And; Cleaning And Care - VALBERG TSH 90T BG 962CV2 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

C

Cleaning and care

Dismantle all the parts, complying strictly with the instructions for use when carrying
out maintenance work on the product.
The effective operation of the hood depends on how frequently it is maintained, particularly
the anti-grease filter and the active carbon filter.
The purpose of the anti-grease filter is to trap particles of grease suspended in the air.
It may therefore become blocked at different frequencies depending on the use of the
appliance.
The anti-grease filters must be washed by hand using neutral, non-abrasive liquid
detergent or in the dishwasher at a low temperature and on a short cycle a maximum
of every 2 months to prevent the risk of fire.
The colour may change after several washes. This is not a viable reason for requesting
a replacement.
The active carbon filters purify the air discharged into the room and mitigate the odours
produced by cooking.
Non-regenerable active carbon filters must be replaced a maximum of every 4 months.
The active carbon saturation depends on the length of time during which the appliance
is used, the type of cooking and how often the anti-grease filter is cleaned.
Clean the inside and outside of the hood frequently using a cloth dipped in denatured
alcohol or neutral non-abrasive detergent.
The light is designed for use during cooking and not to light up the room for extended
periods. The average life of the light will be reduced considerably if it is used for extended
periods.
CAUTION
Failure to comply with these hood cleaning and filter
replacement instructions could cause a fire hazard.
We therefore recommend that you follow the proposed
instructions.
Cleaning and care
15
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

970126

Table des Matières