VALBERG TSH 90T BG 962CV2 Mode D'emploi page 20

B
Installation without external opening
Recycling version
Contact your supplier to obtain active carbon
filters to transform the extractor hood into
a recycling hood.
Installing the active carbon filter (cassette)
• Check that the diameter of the active
carbon filter corresponds the outlet
diameter.
• If necessary, remove the pre-installed
diameter adapter.
• Position the active carbon filter on the
outlet and attach it in place by turning
anticlockwise.
Installing the active carbon filter (cut-out)
• The metal filter has to be removed before
the active carbon filter is installed.
• To open the metal filter, press on
the locking device and pull the filter
downwards.
• Place the precut filter on top of the
metal filter. Hold in position using the
metal rods (supplied according to the
model).
• Replace the metal filter in its original
position.
Using the appliance
13 EN