AmazonBasics B07GSTX6VM Guide page 8

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
Troubleshooting
Problem
The product cannot be
switched on.
The product suddenly stops
working.
Suction power becomes weak.
UV lamp (G) does not work.
The brushroll (F) does not work.
Dismantling for Maintenance
1. Hose, extension tube, dust bag, exhaust grid, filter and all accessories can be
disassembled or detached without any tools.
2. Front cover, cable winder, switch, power suction control and on/off button can be
disassembled by using a screwdriver.
3. PCB, power cord and motor compartment could be accessed by removing 7
screws on the main unit (6 screws on the bottom and 1 beneath the handle cover
on right lower lateral).
4. Motor unit can be accessed by loosening the screws on the motor compartment.
Disposal
8
The Waste Electrical and Electronic Equipment (WEEE) Directive aims to
minimise the impact of electrical and electronic goods on the environment,
by increasing re-use and recycling and by reducing the amount of WEEE
going to landfill. The symbol on this product or its packaging signifies
that this product must be disposed separately from ordinary household
wastes at its end of life. Be aware that this is your responsibility to dispose
of electronic equipment at recycling centers in order to conserve natural
resources. Each country should have its collection centers for electrical and
electronic equipment recycling. For information about your recycling drop
off area, please contact your related electrical and electronic equipment
waste management authority, your local city office, or your household waste
disposal service.
Solution
Check if the power plug is connected to the
power outlet.
Check with another appliance, if the power
outlet works.
The product is in overheating protection
mode. Clean the product and let cool for
2 hours.
Clean the product.
Ensure the lamp is 5-10 cm away from the
cleaned surface.
Ensure you don't exceed a tilt angle of 30°.
Ensure that the correct operation mode is
selected.
Clean the brushroll.
Inspect the brushroll (F) for damage.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

B07gsy1g43

Table des Matières