Cleaning The Control Knobs - Whirlpool RC8600XB Guide D'utilisation Et D'entretien

Masquer les pouces Voir aussi pour RC8600XB:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Cleaning tips
What to use:
Cooktop Polishing Creme included with
your cooktop with paper towel or clean,
damp sponge – This creme has been
developed especially for cleaning and
protecting your cooktop. When using,
follow instructions on container.
Razor scraper – Use to remove cooked-
on soil from your ceramic glass cooktop.
To avoid scratches, keep the razor blade
as flat against the cooktop as possible.
Store razor blades out of reach of
children.

Cleaning the control knobs

1.
Make sure all control knobs are turned to
OFF.
2.
Pull the control knobs straight off. Do not
remove seals under knobs. They keep
moisture and soil out of cooktop.
3.
Wash control knobs with sponge and
warm, soapy water. Rinse well and dry
with a soft cloth. Do not soak.
4.
Replace control knobs by pushing them
firmly into place. Make sure all knobs
point to OFF.
NOTE:
When cleaning, never use steel
wool, abrasives, or commercial oven
cleaners, which may damage the finish.
C ARIN G F OR YO UR CO OK TO P
Steps to follow:
1.
Most spills can be wiped off easily using
a paper towel or clean, damp sponge as
soon as the Hot Surface Indicator Light
goes off.
2.
For stubborn spills, rub Cooktop
Polishing Creme into cooked-on soil
using a paper towel. If some soil remains,
leave some creme on the spot(s) and
follow Step 3.
3.
Carefully scrape spots with the razor
scraper.
4.
Finish by polishing entire cooktop with
Cooktop Polishing Creme and a paper
towel.
Models RC8640XB,
RC8600XB,
RC8646XD,
RC8600XD,
RC8608XD,
GJ8640XB,
GJ8646XD
Models WBC430,
IBC430, WBC441,
and IBC441
11

Publicité

Table des Matières
loading

Table des Matières