Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2
Transport, storage and
packaging
2.1
Transport inspection
Upon receipt check delivery for any damages caused
during transit and completeness.
Any damage must be reported immediately upon
receipt.
Illustr. 2.1 Extent of supply
2.1 Extent of supply
1. Mounting set
2. Screen
3. Accessories set consisting of:
- 6x rubber washer
- 6x washer
- 6x hexagon nut
- 6x headless screw
- 3x wall attachment set
- Installation and operating instructions
2.2 Storage
The mounting set "Regubox" for wall attachment must
only be stored under the following conditions:
– Do not store in open air, keep dry and free from
dust.
– Do not expose to aggressive fluids or heat sources.
– Protect from direct sunlight and mechanical agitation.
– At a storage temperature between -20 °C and +60 °C
and a max. relative humidity of air of 95 %.
2.3 Packaging material
Packaging material is to be disposed of in an
environmentally friendly manner.
3
Materials
Mounting frame:
Steel sheet 1,5 mm, cathodic
dip coated, deep black
Screen:
Wood composite material with
stainless steel surface
4 Installation
Installation mounting set "Regubox" for wall
attachment - Sequence:
1.
Determine the installation location of the mounting
set "Regubox" for wall attachment.
2.
Firmly screw the mounting set "Regubox" onto
the wall with the enclosed wall attachment set.
3.
Mount the ball valve connector block and connect
it to the pipework (the installation and operating
instructions of the ball valve connector block must
be observed).
4.
Install the dwelling station "Regudis W".
5.
Install the exclusive cabinet "Regubox".
6.
Fit the screen (for pipes laid in the wall).
Illustr. 4.1 Fixing points wall attachment
7
Publicité
Table des Matières
