Beem Thermo2Go Mode D'emploi page 30

EN
Troubleshooting
If the device does not work properly, check whether you are able to rectify the problem
yourself. If the problem cannot be solved with the steps that are listed, contact the
customer service department.
Do not attempt to repair a defective electrical device yourself!
Problem
Nothing is shown
on the display (9).
The fuse in the fuse
box is triggered.
Water runs out of
the device.
The coffee runs very
slowly out of the
coffee outlet (4).
The coffee is too
weak.
03510_DE-EN-FR-NL_A5_V1.indb 28 03510_DE-EN-FR-NL_A5_V1.indb 28
Possible cause
Is the mains plug inserted in
the plug socket correctly?
Is the plug socket defective?
No mains voltage is present.
Is the display defective?
Too many devices connected
to the same circuit.
No error can be identifi ed.
Is there too much water in the
water tank (3)?
Is the coffee outlet clogged?
Is the device scale-encrusted?
Is there too much water in the
water tank?
Is there not enough coffee
powder in the permanent fi lter
(16)?
Fix
Insert the mains plug.
Try another plug
socket.
Check the fuse of the mains
connection.
Contact our customer service
department.
Reduce the number of devices
in the circuit.
Contact our customer service
department.
Do not overfi ll the water tank!
Clean the coffee outlet.
Descale the device (see the
"Cleaning and Care" chapter |
"Descaling").
Only pour the quantity of
water required for the number
of cups you want into the
water tank (see the "Handling
and Operation" chapter |
"Filling the Water Tank").
Pour the quantity of coffee
required for the number
of cups you want into the
fi lter (see the "Preparation"
chapter).
28
19.10.2017 09:52:24 19.10.2017 09:52:24