Moulinex ACCESSIMO PC105131 Mode D'emploi page 5

DESCRIPTION
A Drive unit
B Drive rod
C Juice collector
D Non-drip system
USE
Prior to first use, wash the parts that are in contact
with the food (C & F).
• Cut the fruit into two pieces.
• Plug in the appliance.
• Place a glass under the spout (E).
• Remove the safety cover (G).
• Press of the non-drip system (D) to let the juice
flow (fig. 1).
CLEANING
• Always unplug the appliance before cleaning
the drive unit (A).
• Do not immerse the drive unit (A), or place it
under running water. Clean the drive unit (A)
with a damp cloth. Dry carefully.
• Clean the juice collector (C) and the plastic
filter (F) immediately after use to avoid the pulp
TROUBLESHOOTING
PROBLEM
The appliance
will not work
If you have followed these instructions and your appliance still won't work, contact an Approved Service
centre (see list in the service booklet).
CAUSE
* It is not plugged in.
* The voltage is unsuitable for the
appliance.
* The motor will not start due to a
false contact between the cone
and the contact.
E Spout
F Cone with plastic grid
G Safety cover
H Power cord
• Place the halved fruit onto the cone (F) and
press it gently to start the appliance (fig. 2).
• When the fruit is no longer in contact with the
cone, the appliance will stop automatically.
• This appliance is fitted with a non-drip system
(D).
When your juice is ready, press
removing the glass to stop the juice flowing (fig.
3).
from sticking to them (fig. 4 & fig. 5).
• Do not use bleach or abrasive sponges.
• The juice collector (C), the plastic filter (F) and
the safety cover (G) may be cleaned in the
dishwasher in the top tray using the "ECO" or
"SLIGHTLY DIRTY" programmes.
Plug in the appliance to a mans socket
with the correct voltage.
Check the voltage.
Try pressing the cone.
2
SOLUTION
EN
before