Special Function Explanation; Acrobatic Flight - Carson X6 Hexacopter Manuel D'instructions

SpecIaL FunctIon expLanatIon

headless - Function
The Headless-function allows simplified control of a copter, in which all control commands as use the reference point the location of the
pilot. Here, it is no longer necessary, the position and orientation of the model taken into account. A feature which may be a bit confusing
for experienced pilots, beginners, however, it facilitates control significantly.
1. Forward definition
Prepare your helicopter for take off.
2. Switch to headless function and general function
Front
Left Right
Rear

acrobatIc FLIgHt

this model allows you to choose between three difficulty
levels.
The model changes its agility depending on the level selected.
Operate the „expert mode switch" on the transmitter to select
the difficulty level.
Your selection is displayed briefly on the screen (50%, 70% and
100%)
Beginner mode:
Press the mode selection button once: 50%
advanced mode:
Press the mode selection button twice: 70%
expert mode:
Press the mode selection button three times: 100%
GB // 28
1. After the model has been turned on, normal steering mode is
• Headless mode on: the LEDs on the copter flash quickly - solid
• Headless function off: LEDs glow steadily on the helicopter - no
2. In headless state, the operator has no need to recognize the
Front
Left Right
Rear
activated as standard. The LED glows steadily.
Headless mode can be activated by operating the headless
function switch on the transmitter.
beep on the transmitter
Headless mode can be switched off again by pressing the head-
less mode switch again.
beep
position of aircraft's headpiece, and he just needs to control
the aircraft in accordance with the direction of remote control's
operating rod.