Lipo Battery Charging; Ready To Start - Carson X6 Hexacopter Manuel D'instructions

LIpo battery cHargIng

the model is supplied with a LiPo battery
which is located in the body of the copter.
When charging please follow this procedure carefully:
• Switch off copter
• Connect the charging cable to a USB port (e.g. on a computer)
(status LED glows)
• Connect the copter to the charging cable
• Status LED not glowing - battery is charging
• Status LED is glowing – charging process has finished - battery
is full

reaDy to Start

Now we're good to go! But before liftoff, make sure that you have read this manual through completely.
1
Switch on the Copter and place it on a flat surface.
3
Now move the throttle lever completely up and then all the way
back down. Now the Copter is ready to launch.
ON/OFF
Switch
2
Switch on the transmitter. Move the left-hand joystick all the way
downwards (illustration).
ON/OFF
25 // GB