Function Of The Enter Key; Insert Batteries - Carson X6 Hexacopter Manuel D'instructions

FunctIon oF tHe enter key

S/n identification
1
Left control lever
2 Right control lever
3
Nick trim
4
On/off switch
5
Roll trim
6 Stunt button
7 Switch for professional mode

InSert batterIeS

Attention
• Never mix used and new batteries.
• Never use batteries of different types together.
1
Open the battery compartment lid on the back of the transmitter.
3
Close the battery compartment again.
GB // 24
Function
Moving the control lever forwards or backwards makes the copter climb or
dive. Moving the control lever to the left or right makes the copter rotate to
the left or right.
Moving the control lever forwards or backwards makes the copter move
forwards or backwards. Moving the control lever to the left or right makes the
copter move to the left or right.
Nick trim adjusts the forwards and backwards movement.
The transmitter is switched on by pressing the pushbutton.
Roll trim adjusts left and right drift.
Push this button to perform flips and loops.
Pressing this button briefly changes the agility.
• Do not attempt to charge non-rechargeable batteries.
2
Insert fresh AA Mignon batteries with the correct polarity in the
battery compartment.