Retention Bolt Adjustment; Stands; Guarantee; Owner Information - Monitor Audio Studio Manuel Utilisateur

Retention Bolt Adjustment

The Studio loudspeaker has a bolt-through driver fixing to reduce
cabinet colouration. Each bolt acts as a rigid brace, but also removes
the need for conventional driver fixings as well, effectively decoupling
the driver and front baffle to eliminate a further source of resonance.
NOTE: Should this bolt become loose over time, or has
worked loose during transit, then please use the supplied
hex key to tighten the bolt back up. This only needs to be
a quarter turn after the strain has been taken by the bolt.

Stands

New dedicated stands are available, to perfectly compliment both
aesthetically and acoustically with the Studio loudspeakers. They
feature sturdy 'no ring' construction to add safe support and isolate the
speakers from resonant frequencies. The new stands' height has again
been optimised for listening, aligning the speakers tweeters at ideal ear
height within a seated listening position. For more information please
visit our website: www.monitoraudio.com

Guarantee

Both the craftsmanship and the performance of this product is
guaranteed against manufacturing defects for the period of five years
from the date of purchase (see conditions in the Important Safety
Instructions booklet), provided that the product was supplied by an
authorised Monitor Audio retailer under the consumer sale agreement.
To help us find your warranty details within our customer database,
should the need arise, please take a few minutes to register your product(s) online at: monitoraudio.com.

Owner Information

Product Details
Product Serial No:
Date of Purchase:
Dealer Details
Dealer Name:
Address:
Post code:
E-mail address:
6 Studio