Important
Do not open the appliance!
Only at the end of the product's useful life, disassemble the rechargeable
battery for disposal reasons as shown in the battery removal section.
This appliance is designed for household use only.
Description
1a Precision comb for trimming beard and short hair
1b Hair comb for cutting hair *
1c Release buttons for comb
2
Wide trimmer (32 mm)
3
Precision trimmer (16 mm) *
4
Release button precision trimmer *
5
Charge Indicator
6a Lock switch for precision comb
6b Length selector for precision comb
6c Length selector for hair comb
7
On/off switch
8
Special cord set (design can differ)
8a Charging stand *
9
Pouch *
* not with all models
Charging
Recommended ambient temperature for charging is 41 °F to 95 °F / 5 °C to
35 °C. The battery may not charge properly or at all under extreme low or
high temperatures. Recommended ambient temperature for trimming is 60 °F
to 95 °F / 15 °C to 35 °C. Do not expose the appliance to temperatures
higher than 122 °F / 50 °C for extended periods of time.
• Place the appliance (switched off) in the charging stand (8a) or connect it
directly to an electrical outlet via the special cord set (8).
• When charging for the first time or when the appliance is not used for
a few months, leave the appliance to charge continuously for 4 hours
(BT 5050/5030/5010: 8 hours).
• Once the appliance is completely charged, discharge it through normal use.
Then recharge to full capacity. Subsequent charges will take about 1 hour
(BT 5050/5030/5010: 8 hours).
• A full charge provides up to 50 minutes of cordless operating time.
This may vary according to your beard growth.
8