Publicité
Les langues disponibles
Les langues disponibles
CONVERTIBLE OPTIONS
This range hood is equipped with the option of a 6" vertical discharge, 3 1/4"x10" vertical discharge,
or 3 1/4"x10" rear discharge. Additional accessories are provided to convert to either of the above
discharge methods.
Convertible Options
Vertical discharge
Vertical discharge
Horizontal rear discharge
3 1/4"x10" Vertical Discharge
1. Remove pre-mounted 6" transition adaptor or duct
opening. Leave attached gasket in its original place.
3. Mount the 3-1/4"x10" starting collar on top of
transition piece with remaining screws.
INSTALLATION
Convertible Accesories
6" round
Round to rectangular transition adaptor
3 1/4"x10"
Rectangular to round transition adaptor
3 1/4"x10"
Gasket (pre-mounted)
Rectangular rear cap (pre-mounted)
3 1/4"x10" starting collar
2. Place rectangular transition adaptor as shown over
gasket and by first installing 4 screws on half round
section.
7
(pre-mounted)
Publicité
