Publicité
How to attach your silicone breast pump
1. Squeeze the bottom part of the pump gently.
1
2. Gently place the cup onto your breast, with
2
your nipple and areola in the centre.
3. Release your hand. Your nipple should sit and
3
seal around the narrow neck of the pump and
be gently drawn into the pump as you release
your hand. There is no need to seal the whole
pump with your breast or push your breast
into the pump.
4. For best results ensure your nipple is centred
4
in the narrow neck of the breast pump.
It might take a few goes to find the right
position for you.
4
Using your silicone breast pump as a let-down catcher
When nursing on one breast
many mums find that they
naturally produce some milk
from the other breast. You
can use your Made for Me™
Silicone Breast Pump to
catch any milk you produce
from the opposite breast
while nursing.
1.
Attach your silicone breast pump as opposite
1
(Page 4). If you are already producing milk,
then leave the pump in place to collect it.
2.
If you need to stimulate let-down, gently
2
squeeze the pump a few times or massage
your breast until your milk starts to flow.
3.
Nurse your baby on your opposite breast
3
while using the silicone pump to catch your
let-down milk.
4.
Once feeding is complete you can decant
4
and store your milk (see storage guide on
page 8).
5
Publicité
