Megasat Royal Line III 32 Mode D'emploi page 52

7. The Main Menu
7.1.12 Automatic Serach (Cable)
Before starting a station search, make sure
you are on the correct input source. To do
this, press the INPUT button on the remo-
te control and select the item „Cable".
In the search mode, choose between „Full" or „Network Scan". When „Full" the default
search is used, with „Network Scan" you can u.a. set the frequency or network ID.
Then press OK and select the country you
are in (eg Germany).
Subsequently, the automatic transmitter
starts.
7.1.13 Manual Search (Cable)
With the manual DVB-C search you can se-
arch each frequency (channel) individually.
Select the desired frequency with the
buttons. Press the OK button to search to
start the search.
18
t u
ENGLISH