Publicité
Les langues disponibles
Les langues disponibles
5. First installation
1. Connect the TV to the power supply and turn on the power switch at the bottom of
the housing. The TV is now in standby mode (LED is RED).
2. Then press the Power button on the remote control (LED is BLUE).
3. After the TV is started, the First Installation menu appears. You can now make the
following settings:
• OSD language: Choose your language. To
change, use the
• Country: Choose the country. To change,
use the
t u
Press OK to confirm the entries or MENU to cancel.
• TV connection: Use the
choose the type of reception (satellite,
antenna or cable)
• Tuner mode: Choose between DTV (Digi-
tal) or ATV (Analog)
Press OK to confirm the entries or MENU to cancel.
Example in satellite mode
Note: If you are using the TV in satellite mode, you can confirm all setting points with
OK during the initial installation!
• Load program list: The preinstalled channel list is loaded.
Scan Mode - Auto (detail search): Detailed search: Select this option if you
want to perform a self-defined search.
• Fast Scan Mode: Searches the satellite for predefined programs (selectable by
provider).
• Normal Scan: Select your desired options and start the scan. (Unicable, other
satellites, free channels only..........).
Confirm your chosen search function with OK. Now press the
to start the search. Use the
buttons.
t u
buttons.
buttons to
t u
button (No) to cancel the search.
u
ENGLISH
button (Yes)
t
09
Publicité
