Megasat Royal Line III 32 Mode D'emploi page 48

7. The Main Menu
7.1.5 Edit Satellite
In this menu, you can make fundamental
changes to your satellite system, edit or
add transponders and satellites.
Add / Delete Satellite
Delete (RED button)
Deletes the selected satellite. This process
is irrevocable.
Add (YELLOW button)
Add a new satellite. Enter the name and
orbit position of the new satellite.
Edit Satellite
Select a satellite and press the OK button to
make further settings.
You can make the following settings here:
LNB Type
Change the LNB type here
DiSEqC 1.0
Choose between None, LNB 1 to LNB 4
DiSEqC 1.1
Choose between None, LNB 1 to LNB 16
22 KHz
Set the 22 KHz setting to On or Off.
Transponder
Opens the transponder list. Use the RED button to delete the selected transponder. Use
the YELLOW button to add a transponder.
ENGLISH
14