Connecting Chimneys - Foster 2456 911 Instructions D'installation

Connect the appropriate length of duc-
ting to the fan exhaust point and join up
with the ducting to the exte-rior.
Shows venting directly through the wall.
Venting up and through the ceiling to the
exte-rior is also possible.
Do not fix the ducting to the range
hood exhaust outlet with screws-use
duct tape. Use duct tape on all joints.

Connecting Chimneys

Remove the protective covering from the
decorative chimney and carefully slide
the sections together. Do not remove the
tape strips from inside the chimney as
this protects the telescoping chimney-
piece from scratching. Holding the two
chimney sections together carefully po-
sition them over the ductwork and wi-
ring. Position the upper chimney so that
it can be fixed via the holes on the side
of the 'Y" bracket on the ceiling.
9