Instrument Identification - Endress+Hauser promass 64 II2G Mise En Service

Promass 64
Exchange of electronics unit
Warning!
The four positions on the electronics
unit label must match the last four
positions of the order code on the
transmitter nameplate (see Fig. 5),
otherwise the electronics unit may not
be installed. Before reapplying power,
the housing cover must be tightly closed.

Instrument identification

Transmitter Promass 64 (example):
Production
location
Instrument group and instru-
ment category according
to Directive 94/9/EC
Labelling of the type of
protection and
explosion group of the
electronics unit
Ambient
temperature range
Labelling of the type of
protection and
explosion group for the
transmitter housing
Sensor Promass A/F/M (example):
Production
location
Instrument group and instru-
ment category according
to Directive 94/9/EC
Labelling of the type of
protection and
explosion group for the
Promass A/F/M sensors
Endress+Hauser
These four positions must match the last
four positions of the order code (see Fig. 5)
Module designation
Notified body for Q-Control:
TÜV-Hannover/Sachsen-Anhalt e.V.
CH-4153 Reinach
ENDRESS+HAUSER
PROMASS 64
Order Code:
XXXXXX-XXXXXXXXXXX
XX XXXXXX XX
Ser.No.:
16-62VDC/20-55VAC
50-60Hz
2-PULSE-OUT
II2G
EEx de ib IIC T2-T6
EEx d ib IIC T2-T6
Typ Promass
TM<-20°C;Tamb-10°C...+60°C SYST EEx ib/ia IIC/IIB
≥
TM -20°C;Tamb-20°C...+60°C BVS 96.D.2022 X
DMT 99 ATEX E 015 X
PRO-LINE Housing/Gehaeuse
EEx d IIC/EEx de IIC
BVS 95.D.2010 U i
DMT 98 ATEX E 029 U
After de-energizing, delay 10 Minutes before opening!
Nach dem Abschalten 10 Minuten warten vor dem Oeffnen!
Pat.UK EP 618 680
Pat.US 5,479,007 5,648,616
Pat.US 4,768,384 4,801,897 Pat.UK EP 261,435 262,573
Notified body for Q-Control:
TÜV-Hannover/Sachsen-Anhalt e.V.
CH-4153 Reinach
ENDRESS+HAUSER
PROMASS A
XXXXXX-XXXXXXXXXXX
Order Code:
XX XXXXXX XX
Ser.No.:
1.5328/0000
K-factor:
DN02 1/2" TRICLAMP 160bar
Pmax.:
Werkstoffe:
1.5328/0000 200°C
TMmax.:
Materials:
Dichtekalibrierung:
+/-0.020g/cc
Density calibration:
5P-CAL, 3.1B
25 bar Container
II2G EEx ib IIC T2-T6 XA004D/
i
06/../....
BVS 96.D.2022 X
DMT 99 ATEX E 015 X
Tamb/Tumg:-20°C..+60°C
Pat.US 5,705,754
Ambient
temperature range
64XMOD-
39
AB9
129
RS9
Possible contents in the order
code
When exchanging the
electronics unit, these last
four order code positions
0032
must match the four positions
on the electronics unit label
(see Fig. 4)
1999
Year of manufacture
15VA/W
IP67
Labelling of the type of
protection and explosion
group for the Promass 64
measuring system
Corresponding
XA004D/
06/../....
Ex documentation
Warning
0032
1999 Year of manufacture
IP67
Corresponding
Ex documentation
en
Warning!
Fig. 4
Label on the electronics unit
Fig. 5
Nameplate for the transmitter
Promass 64 Ex version
Fig. 6
Nameplate for the sensors
Promass A/F/M Ex version
9