Publicité
GENERAL CONSIDERATIONS
- For your column to function correctly, the water
supply pressure must not be higher than 5 bar or
lower than 2 bar. For safety reasons, however, it
must not exceed 55ºC. Always respect these
limits. If the pressure or temperature of the water
is higher, the column could be damaged. On the
other hand, if the pressure of the water is lower,
your column may not function correctly.
- The thermostatic tap regulates the temperature
by activating the thermostatic cartridge. If the
boiler switches off too often and cold water comes
out when using any of the functions of the column,
clean the filters of the thermostatic taps and, if the
problem persists, reduce the temperature of hot
water coming from the boiler or heater with the
appropriate control on the device. In all cases,
consult the technical characteristics of the boiler.
HYDROMASSAGE
Before a hydromassage: If you have not used a
certain function of your hydromassage for some
time, the anti-limescale injectors should be
checked as indicated in the hydromassage
maintenance instructions.
Pressure of the water jet: Regulate the water
flow for a more or less powerful massage.
Combinations of the type and duration of
massage and the temperature of the water
enable you to adapt the hydromassage to your
requirements.
In general, the intensity of the water jet has the
following effects:
-Greater intensity: toning effects.
-Less intensity: relaxing effects.
The hydromassage should never be excessively
strong.
CHIC
Temperature of the water: we recommend that
this be between 30 ºC y 39 ºC:
Hydromassage:
-Cold (30 - 35ºC). With mainly toning effects.
-Neutral (36 - 37ºC). For relaxing effects.
-Hot (38 - 39ºC). For muscular applications.
Thermostatic tap: You can select the desired
temperature by means of the "temperature
indicator control". Turn the on-off control until you
reach the desired water flow rate. The water will be
at the temperature you have selected.
On the "temperature indicator control", there is a
safety button that prevents temperatures over
38ºC being selected by mistake. If you want a
higher temperature, press the button to unblock
this safety mechanism.
Hydromassage process:
Select the desired function using the function
selector, which permits the following options:
•Spray massage (fixed shower). For general
use
•Massage with the hand-shower. Adapting its
possible
functions to specific parts of the
body.
•Body massage with the upper vertical jets.
For application over a wide area of the upper
body.
•Body massage with the lower vertical jets. To
apply on the lower part of the body.
Adjust the temperature of the water.
Select the appropriate function.
Turn the water on progressively until you obtain the
most appropriate hydromassage pressure.
Publicité
