Eton SOLARLINK FR600 RDS Mode D'emploi page 19

SELECTING DISABLE/ENABLE
Alert modes can be selected to not appear by selecting DISABLE
or to appear by selecting ENABLE.
1) Revolve the <Band Selecting Knob> to "OFF" position.
2) Press <MENU> button shortly to enter the setting menu.
3) Press <> or <> shortly to select "DEFEAT" option.
4) Press <SELECT> shortly once to enter the DEFEAT setting
mode.
5) Press <> or <> shortly to select the alert message you
wish to defeat or enable.
6) Press <> or <> to select DISABLE or ENABLE (printed under
the message on right side of display).
7) After setting, press <SELECT> shortly to save.
ALERT
Before using the ALERT function, set the radio to the strongest
weather band station. After setting, revolve the <Band Selecting
Knob> to "ALERT" position. The alert indicator light will be on.
OPEN / CLOSE THE ALERT BELL
While the alert bell is ringing, you can press the <ALERT-ON/OFF>
button (in the space above the display – right side) shortly to shut
off the ringing, then press it shortly again to resume ringing.
SOLARLINKFR600RDS OWNER'S MANUAL
19