Eton SOLARLINK FR600 RDS Mode D'emploi page 18

4) Press <SELECT> shortly once to enter the county code setting
mode (MULTI, SINGL or ALL), which blinks in the display.
5) If you don't know your county code, select ALL with or and
press <SELECT> and then <MENU> TO EXIT. If you know your
code, don't press SELECT and go to the next section.
6) Press  or  shortly to select MULTI or SINGL and press
<SELECT>.
7) Press <SELECT> shortly again to enter the code. CODE 01
XXXXXX appears in the display, with 01 flashing.
8) Press <SELECT> again and the first digit of six starts flashing.
Press or  to set the first digit and then press to go to the
second digit, doing this again and again until all six digits are
entered.
9) If you're in SINGL, press <SELECT> and then <MENU> to exit.
If in MULTI, go to the next step.
10) If you're in MULTI and wish to enter more codes, press
<SELECT>.
11) 01 flashes. Press or  to go to another code setting number
(1-23 flashes) and press <SELECT>.
12) The first digit of six flashes, use or to set it and press
to enter the next number, doing this again and again until
all six digits are entered.
13) Press <SELECT> to choose another code number (1-23) and
when your finished press <SELECT> and then MENU to exit.
RECEPTION OF EVENT CODES
Your radio can receive 'event code' information during weather
alerts. These codes are identified at http://www.nws.noaa.gov/os/
eas_codes.shtml.
Canadian Weather Alerts are addressed at: http://www.msc-smc.
ec.gc.ca/cd/brochures/warning_e.cfm#top.
18
SOLARLINKFR600RDS OWNER'S MANUAL