Publicité
Les langues disponibles
Les langues disponibles
Operating mode ...................................................................
Sound pressure level (L
Sound power level (L
The noise level during operation can exceed 85 dB (A). Wear ear protection!
Measurements found in compliance with EN 60745-1.
Vibration total value .............................................................
The vibration level given in this information sheet has been measured in accordance with a
standardised test given in EN 60745 and may be used to compare one tool with another. It may
be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or
insertion tools or is poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the
times when the tool is switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibra-
tion such as: maintain the tool and the accessories, keep the hands warm, organisa-
tion of work patterns.
2.1
Technical data battery / charger
Battery, art.-no.:
Typ/ model ...................................... Lithium-Ion
Voltage ........................................... 14,4 V DC
Capacity ......................................... 2,6 Ah
Max. discharging temperature. ........ -20°C +60°C
Approx. charging time (90% full) ..... ca. 70 min
Weight ............................................ ca. 470 g
Recharge battery pack before first use!
Deep discharge protection may influence empty
battery detection of the machine!
3
Function of the Unit
3.1
Changing the battery
Insert battery until the catch clicks into place. (LED flashes briefly = Contact made). To remove
press the catch and take out the battery.
If the battery voltage is lower than necessary, the LED flashes red. Charge the battery in
the charger.
) ...................................................
pA
) ......................................................
WA
15418
Battery
ENGLISH
S3
71 dB (A) ¦ K
pA
82 dB (A) ¦ K
WA
2
≤ 2,5 m/s
¦ K= 1,5m/s
Charger, art. no.:
Typ/ model ........................................
Input voltage .....................................
Input capacity ....................................
Input frequency .................................
Input power .......................................
Charging voltage ...............................
Max. charge current ..........................
Rated output .....................................
Number of battery cells .....................
Weight ..............................................
Pay attention to the electrical outlet
voltage! Check the label on the bottom
of the charger.
3 dB (A)
3 dB (A)
2
EU 15017,
AUS 1500000230,
US 1000001827
Charger for 14,4V
Li-Ion Akku
220-240 V AC
110V AC
0,4 - 0,8 A max.
50 – 60 Hz
70 W max.
7,2 - 16 V DC
3 A max.
48 W max.
8
ca. 450 g
(A)
17
Publicité
