Vertical Ironing; Maintenance And Cleaning - UFESA PV0500 Mode D'emploi

Masquer les pouces Voir aussi pour PV0500:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
SHOT OF STEAM
The shot of steam feature provides additional steam for removing stubborn wrinkles.
Turn o the variable steam control to the min position
Press the powerful steam button to release the burst of steam.
NOTE: To prevent water leakage from the soleplate, do not keep the powerful steam button in
continuously and wait almost 5 seconds between pressures.

VERTICAL IRONING

By pressing the shot-steam button at intervals you can also iron vertically (curtains, hung garments, etc.)
NOTE: To prevent water leakage from the soleplate, do not keep the powerful steam button in
continuously and wait almost 5 seconds between pressures.
FOLDABLE HANDLE
The product has a foldable handle for easy transportation and storage while travelling. To fold or unfold
it, press the "PUSH" button and move the handle until you hear a CLICK.
VOLTAGE SELECTOR
Please select the required voltage depending on the place you travel by using the voltage selector. Make
sure the voltage selector is fully changed from one voltage to the desired one.
WHEN YOU FINISHED IRONING
Set the temperature dial to the minimum position.
Remove the main plug from the wall socket.
Stand the iron on heel rest.

MAINTENANCE AND CLEANING

It is recommended to the self-cleaning every two weeks if the water in the area is hard or semi-hard if
frequent use of the device is made
Before cleaning the steam iron ensure it is unplugged from the power supply and has completely cooled
down.
Do not use abrasive cleaners.
To clean exterior surfaces, use a damp soft cloth and wipe dry. Do not use any chemical solvents, as
these will damage the surface.
Cleaning the soleplate; Do not use scouring pads or harsh cleaners on the soleplate as these will damage
the surface. To remove burnt residue, iron over a damp cloth while iron is still hot. To clean the soleplate,
simply wipe with soft damp cloth and wipe dry.
Please note:
Do not use chemical additives, scented substances or decalcifies. Failure to comply with the
above-mentioned regulations leads to the loss of guarantee.
16

Publicité

Table des Matières
loading

Table des Matières