Taurus ATLAS 2400 CERAMIC Mode D'emploi page 6

English
Steam iron
Atlas 2400 Ceramic
Atlas 2600 Ceramic
DESCRIPTION
A Spray button
B Steam blast button
C Steam flow control
D Auto-cleaning button
E Temperature regulator
F Pilot light
G Filling spout
H Spray nozzle
I Soleplate
Read these instructions carefully before swit-
ching on the appliance and keep them for future
reference. Failure to follow and observe these
instructions may result in an accident.
USE AND CARE:
- Fully unroll the appliance's power cable before
each use.
- Do not use the appliance if the accessories
attached to it are defective. Replace them
immediately.
- Do not use the appliance on any part of the
body of a person or animal.
- Do not use the appliance with pets or animals.
- Do not use the appliance to dry textiles of any
kind.
- Turn the thermostat control to the minimum
(MIN) setting. This does not mean that the iron
is switched off permanently.
INSTRUCTIONS FOR USE
BEFORE USE:
- Remove the appliance's protective film.
- Some parts of the appliance have been lightly
greased. Consequently, the first time the
appliance is used a light smoke may be detec-
ted.
- Prepare the appliance according to the function
you wish to use.
FILLING WITH WATER:
- It is essential to have filled the deposit with
water to be able to work with steam.
- Open the lid of the filling mouth.
- Fill the deposit taking care to observe the MAX
level (Fig. 1)
- Close the lid of the filling mouth.
USE:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- The pilot light (F) comes on.
- Turn the thermostat control to the desired tem-
perature position.
- Do not use temperatures higher than those
indicated on the garments to be treated.
- ● Temperature for synthetic fibres (Polyester,
Nylon...).
- ●● Temperature for silk, wool.
- ●●● Temperature for cotton. (Minimum tempera-
ture for steam ironing)
- Max Temperature for linen.
- If garment has various kinds of fibres, select the
temperature for the fibre that requires the lowest
temperature. (For example, select the tempera-
ture for polyester for an article made out of 60%
polyester and 40% cotton).
- Wait until the pilot light (F) has gone out which
will indicate that the appliance has reached an
adequate temperature.
- During use the pilot light (F) will automatically
flash on and off, thus indicating that the heating
elements are operating in order to maintain the
desired temperature.
DRY IRONING:
- The appliance has a steam flow regulator (C)
that permits dry ironing (without steam) when
placed in the 0 position.
STEAM IRONING:
- It is possible to iron with steam whenever the
deposit is filled with water and the adequate
temperature is selected.
STEAM FLOW CONTROL:
- The appliance has a (C) control knob that allows
to get the control of the steam flow.
SPRAY:
- The spray can be used in both steam and dry
ironing.
- Press the spray button ( A ) to use this opera-