NSK S-Max M65 Mode D'emploi page 3

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1. Features
· S-Max M65 is able to mount the Contra-Angle Bur ( ISO1797-1 Type1 ) and Handpiece Bur.
· The patented CLEAN-HEAD system in the handpiece nose prevents invasion of saliva, blood, and other contaminants into the
handpiece.
· NSK's technology minimized vibration under cutting, and improved work accuracy.
· The handpiece is less heat generation.
· Autoclavable up to 135°C.
2. Connecting / Removing the Handpiece and the Motor
( 1 ) Connecting
Align handpiece and the motor, and insert it straight until end of the motor insertion.
( 2 ) Removing
Hold the handpiece and the motor, and pull it out straight.
2
3. Changing Bur
(1) Handpiece Bur
Inserting the Bur
1 ) Turn the Bur Lock Ring in the direction of mark [ O ] until it clicks.
2 ) Insert the bur.
3 ) Turn the Bur Lock Ring in the direction of the mark [ C ] until it clicks. Make sure Black Dots align ( See the picture below ) .
Removing the Bur
Turn the Bur Lock Ring in the direction of mark [ O ] until it clicks and remove the bur.
Open
Close
Align
Bur lock ring
Black Dot
Fig. 1
3

Publicité

Table des Matières
loading

Table des Matières