Technical Data; Important Safety Information - Power Fist 8005448 Guide De L'utilisateur

Technical Data:

• Capacity: 100 nails
• Nail length 3/8" to 1-1/4" (10 to 32 mm)
• Fastener size: 18 gauge (1.25 x 1.00 mm)
• Operation pressure: 60 to 100 PSI
• Max pressure: 120 PSI
• Air inlet: 1/4" NPT

Important Safety Information

1. Keep children away. All children should be kept away from the work
area. Do not let them handle the tool.
2. Wear safety glasses and ear protection. Air tool operators and others in
the work area should always wear safety glasses to prevent injury from
fasteners and flying debris when loading and unloading nailer. Safeguard
against hearing damage with proper ear protection.
3. Never use oxygen or any other combustible bottled gas as a power
source, it may cause an explosion and serious personal injury.
4. Do not connect tool to compressed air with a pressure exceeding 120 PSI.
5. Avoid using overly long air-hose, as this can present a tripping hazard.
Tighten all connections.
6 Carry tool only by the handle, not the trigger. Pull on the safety yoke
mechanism to avoid unintentional firing of fastener.
7. Keep the tool pointed away from yourself and others at all times. Guard
against possible injury.
8. Disconnect tool from air supply before loading fasteners to prevent a
fastener from bing fired during connection.
9. Do not keep the trigger or safety depressed while loading fasteners. The
unintentional firing of a fastener can cause personal injury.
10. Disconnect tool from air supply hose and close the compressor before
performing maintenance. Do not alter the accessories during operation.
11. Only use parts and accessories recommended by the manufacturer.