Philips sonicare Essence+ Mode D'emploi page 11

Easy-start
Quadpacer
The Easy-start feature gently increases power
over the first 14 brushings to help you get used to
brushing with the Philips Sonicare toothbrush. This
Philips Sonicare toothbrush comes with the Easy-
start feature activated.
Activating or deactivating the Easy-start
feature:
Place the handle in the plugged-in charger.
-
To activate Easy-start:
Press and hold the power on/off button for
2 seconds. You hear 2 beeps and the battery
level indicator lights up green to indicate that
the Easy-start feature has been activated.
-
To deactivate Easy-start:
Press and hold the power on/off button for 2
seconds. You hear 1 beep and the battery level
indicator lights up yellow to indicate that the
Easy-start feature has been deactivated.
Note: Each of the first 14 brushings must last at
least 1 minute to move through the Easy-start
ramp-up cycle properly.
Note: Use of the Easy-start feature beyond the
initial ramp-up period is not recommended and
reduces the effectiveness of the Philips Sonicare
toothbrush in removing plaque.
11
English