Hamilton Beach Commercial Mix'n Chill HMD200 Manuel D'utilisation page 4

Parts and Features
The parts and features of the Mix 'n Chill
Become familiar with all parts and features before using the mixer.
Speed
Control
Knob
Program
Knob
Spindle Shaft/
START ( )
(Pivot to start)
Agitator
Assembly
(Replace every
90 days)
Splash
Pan
How to Install Memory Card:
1. Unplug unit.
2. Locate memory card cover on back of unit
and remove screws.
3. Insert new memory card in slot.
4. Plug in unit and turn on power switch.
When green light stays on, update is complete.
5. Turn off unit.
6. Unplug unit.
7. Remove memory card.
8. Reinstall memory card cover.
4
® are shown on this page.
Power Switch
ON (I)/OFF (O)
and circuit breaker
START/STOP (
and Pulse ( )
Switch
Splash
Shield
(2) Splash Pan
Thumbscrews
Removing Splash Pan
/ )
Power Cord