4000 Series
Art. 4384
Speaker unit with built-in camera
Art. 4384X
Speaker unit with built-in camera & proximity key reader
REPROGRAMMING A MASTER TAGS
If the master tag is lost or damaged, a new one can be programmed using the following procedure:
1. Switch off the power.
2. Open the external module housing.
3. Bridge the PTE and GND terminals or press and hold down the "press to exit" button, if this
is wired to the external module (refer to the external module's instructions).
4. Switch the power back on.
↪ The external module emits a high-pitched "beeping" sound.
5. Remove the short between the PTE and GND terminals or release the "press to exit" button.
↪ The external module emits a high-pitched "beeping" sound.
6. Place the master tag in front of the tag reader.
↪ The external module emits two high-pitched "beeping" sounds, then two low-pitched
"beeping" sounds, the master tag is programmed, all user tags have been deprogrammed
and the external module exits programming mode.
7. Close the external module's housing.
CAMERA NOTES
PRECAUTIONS ON THE CAMERA
• Please note that OPENING THE MODULE WILL INVALIDATE THE WARRANTY. In addition, any dust ingress could
COMPROMISE THE IMAGE QUALITY.
• REMOVE THE PROTECTIVE FILM ONLY AFTER INSTALLATION AND SUCCESSFUL TESTING HAS TAKEN PLACE to avoid
scratches that could AFFECT THE IMAGE QUALITY.
FIELDS OF VIEW
The fields of view for standard camera are 55° for vertical angle and 115° for horizontal
angle while for Wide Angle camera are 80° for vertical angle and 170° for horizontal angle.
Vertical angle
195 cm
170 cm
80°
100 cm
75 cm
70 cm
Standard camera
Art. 4384/4384X -
Installation instructions
Horizontal angle
55°
135 cm
Wide Angle camera
180 cm
105 cm
170°
115°
70 cm
- 6 -
4384-0
4384-1
4384-2
4384X-0
4384X-1
4384X-2
STEEL
ALI
MATTE
R 0.1
GUN METAL
Made in Italy
BIP
BIP
BIP BIP
BIP
BIP
MAXIMUM ILLUMINATION DISTANCE
FROM CAMERA AT NIGHT
The illumination LED's within the camera
will illuminate the visitor when they are
within 50 cm of the camera.
MAX 50 cm
66251850 - V3.3 - 30/11/22
ON
1 2 3 4 5 6 7 8
RS485
EXPANSION
BUTTONS