Videx 4000 Serie Mode D'emploi
Masquer les pouces
Voir aussi pour 4000 Serie:
- Mode d'emploi (29 pages) ,
- Manuel d'installation (25 pages) ,
- Manuel d'instructions (16 pages)
Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
4000 Series
Art. 4330
Camera module
A
B
Fig. 1 Front
DESCRIPTION
This module is equipped with a colour camera with auto iris
lens complete with white light illumination LED's. The module is
available with Wide Camera option (put /WD after the product
code). The module has a coax video signal input for an exter-
nal additional camera (switched from the videophone or video
monitor) with a facility to power the external camera directly.
CNV CONNECTOR
CNV connector to link between the camera and the Art. 4303N
using the supplied cable.
ADHESIVE GASKET PLACEMENT
seal as shown in Fig. 3.
Apply the
Y
ANTI-TAMPERING LOCKS FIXING
Fit the anti-tampering locks
Art. 4330 - Installation instructions
as shown in Fig. 4.
W
A
C
E
CNV
D
Fig. 2 Back
LEGEND
Illumination LEDs
A
Camera
B
Camera horizontal and vertical adjustment
C
(Not available in Wide Angle versions)
CNV connector
D
External camera power supply setup jumper
E
Connection terminals
F
EXTERNAL CAMERA POWER SUPPLY SETUP JUMPER
Left position (factory preset):
The external camera is powered from an external
power supply
In right position:
The external camera is powered from the terminal +V2
(12Vdc) & GND
Y
Fig. 3
- 1 -
4330
STEEL
ALI
HIGH BRASS
MATTE
Made in Italy
Ext.Camera self powered
Ext. Camera powered from +V2
G
Fig. 4
66251380 - V4.4 - 31/05/23
Rev.0.4
Ext.Camera
F
W
Publicité
Manuels Connexes pour Videx 4000 Serie
Sommaire des Matières pour Videx 4000 Serie
- Page 1 4000 Series Art. 4330 Camera module Rev.0.4 4330 STEEL HIGH BRASS MATTE Made in Italy Ext.Camera self powered Ext. Camera powered from +V2 Ext.Camera Fig. 1 Front Fig. 2 Back DESCRIPTION LEGEND This module is equipped with a colour camera with auto iris Illumination LEDs lens complete with white light illumination LED’s.
- Page 2 4000 Series Art. 4330 Camera module CAMERA NOTES PRECAUTIONS ON THE CAMERA • Please note that OPENING THE MODULE WILL INVALIDATE THE WARRANTY. In addition, any dust ingress could COMPROMISE THE IMAGE QUALITY. • REMOVE THE PROTECTIVE FILM ONLY AFTER INSTALLATION AND SUCCESSFUL TESTING HAS TAKEN PLACE to avoid scratches that could AFFECT THE IMAGE QUALITY.
- Page 3 Serie 4000 Art. 4330 Modulo telecamera Rev.0.4 4330 STEEL HIGH BRASS MATTE Made in Italy Ext.Camera self powered Ext. Camera powered from +V2 Ext.Camera Fig. 1 Fronte Fig. 2 Retro DESCRIZIONE LEGENDA Modulo per sistema digitale VX2300 equipaggiato con teleca- LED di illuminazione mera autofocus a colori completa di LED d’illuminazione a luce Telecamera bianca.
- Page 4 Serie 4000 Art. 4330 Modulo telecamera NOTE TELECAMERA PRECAUZIONI SULLA TELECAMERA • Si ricorda che L’APERTURA DEL MODULO NE INVALIDA LA GARANZIA. Inoltre l'eventuale ingresso di polvere potrebbe COMPROMETTERE LA QUALITÀ DELL’IMMAGINE. • RIMUOVERE LA PELLICOLA PROTETTIVA SOLO AL TERMINE DELL’INSTALLAZIONE E DELL’AVVENUTO COLLAUDO CON SUCCESSO per evitare graffi che potrebbero COMPROMETTERE LA QUALITÀ...
- Page 5 - 5 - 66251380 - V4.4 - 31/05/23...
- Page 6 - 6 - 66251380 - V4.4 - 31/05/23...
- Page 7 DISPOSAL In accordance with the Legislative Decree no. 49 of 14 March 2014 “Implementation of the Directive 2012/19/EU on waste electrical and electronic equipment (WEEE)”. The crossed-out bin symbol on the equipment or on the packaging indicates that when the product reaches the end of its lifetime, it must be collected separately from mixed municipal waste.
- Page 8 APOIO AO CLIENTE خدمة العمالء Portugal office: Singapore office: VX IBÉRIA, UNIPESSOAL LDA VIDEX ASIA PACIFIC PTE LTD Rua Tenente Mário Grilo, 26 D, E, F 1 TAMPINES NORTH DRIVE 1, 4200-397 Porto #06-08, T-Space Phone: (+351) 221 124 531 Singapore 528559 www.videx.it...