Advisory Section
To ensure the safety of you, the installer and your children, it is important that these instructions are read fully before
commencing the positioning and installation of this product. Assembly is to be carried out by a competent adult only.
During assembly children should be kept away from the product due to possible risk of injury. Do not use this item if
any components are missing or damaged.
Keep your sand table safe for the children
1. Always cover the sand when not in use, to prevent unwanted animals from playing in the sand.
2. Regularly check sand for impurities and any other sharp objects that may cause harm to children, including at the
beginning of the season.
3. Use washed play sand suitable for use in children's sand pits.
4. Reguarly change the sand to ensure that there is no build up of mould and to ensure that the play area is hygenic.
5. In windy and adverse weather conditions place the product in a safe area. In these conditions the product may
become a hazard.
6. Use on a flat surface and not to be installed over concrete, asphalt and any other hard surface.
7. Under no circumstances must modifications or repairs not approved by the manufacturer be conducted
Supervised Nursery Use
When the product is used in a supervised nursery environment, these additional requirements apply:
1. Maintenance must be carried out on a daily basis before the item is used
2. Ensure that the product and any content is clean before the product is used
3. Ensure all surfaces are clean and dry
Timber Advice
This product has been made from premium timber. Great care has been taken in selecting, treating and machining the
timber before it is presented to you. Timber is a natural product and as such may experience changes throughout the
course of its life. This means it may:
Develop openings (gaps, slits, apertures, cracks, splits) along the line of the grain. These openings are due to
the difference in moisture content between the internal and outer surfaces of the timber. This is to be expected,
is totally acceptable and will not affect the integral strength, life or guarantee of the product.
Warp and distort its shape. Any distortion will be slight and will not affect the safety or enjoyment of this
product.
Fade as the timber reacts with sunlight. The timber should be treated with a proprietary product to act as a
protective barrier, i.e. a water repellent, on an annual basis.
After first year of service treat product with a good quality treatment safe for children's use.
Biocidal Products Regulations EU 528/2012
Wolmanit Cx treated wood is a treated article that incorperates biocidal products:
copper hydroxide carbonate /II/and boric acid. They protect wood against decay /rot/ and insect attack. keep away from food,
drink and animal feeding stu s.
Routine Maintenance
It is advised that on a regular basis (i.e. at the beginning of the season and monthly thereafter) all main parts/ fixings
are checked as secure, well oiled (if metallic), have no sharp points/edges and are intact. Replace, oil and/or tighten
when necessary. Failure to do so may result in an injury or hazard.
IMPORTANT: RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE
Plum Products Ltd,
The Cliff, Middle Street
Ingham, Lincolnshire, LN1 2YQ, UK
Tel: +44 (0) 844 880 5302,
Fax: +44 (0) 152 273 0379
www.plumproducts.com
Copyright Plum Products 2013
2
Plum Products Australia Pty Ltd,
303/154-158 Military Road,
Neutral Bay, NSW 2088, Australia
Tel: 02-99605500
Helpline: 1800 900 161
Email: aushelpdesk@plumproducts.com