Beginning work with the machine
Attention:
Always wear slip-resistant shoes and ap-
propriate working clothes when working
with this machine!
Notice:
Whilst operating the machine always keep
both hands on the steering wheel / driving
handle, so that safe operation is guaran-
teed.
Attention:
Start familiarization with the machine by
making your first driving attempts in a free
area.
Attention:
If there is a danger of falling objects during
use of the machine, the necessary safety
precautions must be taken or adhered to in
accordance with national regulations.
• Lower the squeegee.
• Unlock the foot pedal and lower the
tool slowly.
Manual program start
• Switch the machine on.
• To do this, press the main switch but-
ton (ON/OFF) for 3 seconds.
The display lights up briefly.
• Press the Suction unit ON/OFF but-
ton.
The display lights up; the suction en
gine starts.
• Press the Cleaning solution supply
ON/OFF button.
The display lights up.
The cleaning solution supply is start
ed when the brushes rotate.
• Use the quantity control to dose the
cleaning solution.
Notice:
Diversey recommends a sustainable work-
ing by determination of the correct product
dosing quantity. Overdosing or underdos-
ing will lead to unsatisfactory cleaning re-
sults.
One-button function
• Switch the machine on.
• To do this, press the main switch but-
ton (ON/OFF) for 3 seconds.
The display lights up briefly.
Notice:
The values preset when switching off the
machine are stored and will be automati-
cally activated when restarting the ma-
chine.
Notice:
The preset values can be adjusted at any
time during operation.
Cleaning start
• Press the operating levers on the
machine handle.
The tool starts to rotate and the
cleaning solution supply starts.
Power off function
Notice:
The machine turns itself off after 5 minutes
when no longer in use.
During these 5 minutes:
• the brushes may not be manipulated in any way.
• the user must not leave the machine out of sight.
• sucked in or jammed objects may be cleaned from the
squeegee only.
• the user is only allowed to leave the machine in order to
clear the work space. The user must maintain visual con-
tact.
-
-
EN
69