Burg Wächter RS 110 C SB Instructions De Montage Et Mode D'emploi page 5

Operation
Open
To open, rotate all 4 dials to the pre-set
combination along the centre line.
The pre-set factory combination is 0-0-0-0.
The dials stop automatically at 0 if they
are turned towards the side bolt. This
fuctionality is helpful when the lock is
opened in poor light, as the clicks of the
turning dials can be counted.
Set your own combination
On the end of the locking bolt, fully
depress the small silver pin. (Fig. 1)
Whilst holding in the pin, rotate the 4
dials to your chosen secret combi nation.
Ensure the numbers are positioned
centrally and have clicked into position.
Release the pin to the original position.
Memorise and record the new combi nation
for future reference.
The new code is now set.
Note: If the new code is lost, the lock
cannot be opened any more.
RS 110 C SB English | 7