General Notes; Technical Data; Overload Protection - marklin 67014 Mode D'emploi

2. General Notes

• The operating instructions are a component part
of the product and must therefore be kept in a safe
place as well as included with the product, if the lat-
ter is given to someone else.
• Märklin switched mode power packs may only be
used with products from the brands Märklin and Trix.

3. Technical Data

See the specifications plate on the power pack.
Example:

4. Overload Protection

A built-in overload protection protects the switched
mode power pack from damage in the event of an
overload or a short circuit. The switched mode power
pack turns itself off and waits until the problem has been
corrected. Do not try to run any locomotive or control
any turnout as long as the problem is still present.
5