Philips HP6511 Mode D'emploi page 10

EnglisH
10
Corded use
You can also use the appliance from the mains. However, to avoid
damage to the batteries, only use the appliance from the mains when
the batteries are empty.
1 To run the appliance from the mains when the batteries are empty,
switch off the appliance and connect it to the mains. Wait a few
seconds before you switch on the appliance.
Epilating the legs
Make sure your skin is clean, entirely dry and free from grease. Do not
use any cream before you start to epilate.
1 Select the desired speed to switch on the appliance (Fig. ).
Select speed I for areas with little hair growth and for areas where bones
are located directly beneath the skin, such as knees and ankles.
Select speed II for larger areas with stronger hair growth.
 Stretch your skin with your free hand to make the hairs stand
upright.
 Place the appliance perpendicularly onto the skin with the epilating
head pointing forward. Move the appliance against the direction of
hair growth at a moderate speed (Fig. ).
Make sure both the epilating discs and the massaging element are in
proper contact with the skin.
Press the appliance lightly onto the skin.
If you are not completely satisfied with the epilation result, try
,
moving the epilator more slowly over your skin.
Epilating the underarms and bikini line
Your epilator comes with a sensitive area cap that reduces the number of
active epilating discs. This makes the appliance ideal for epilating the more
delicate areas of the body, such as the underarms and bikini line.
Note: You get the best results when the hairs are not too long (max.1cm).
1 Put the sensitive area cap on the epilating head (Fig. 5).