Jabra BT2070 Mode D'emploi page 8

Make a call
• When you make a call from your mobile phone, the call will
(subject to phone settings) automatically transfer to your
headset . If your phone does not allow this feature, tap on the
Jabra BT2070's answer/end button to transfer the call to the
headset .
Reject a call *
• Press the answer/end button when the phone rings to reject an
incoming call . depending on your phone settings, the person
who called you will either be forwarded to your voice mail or
you will hear a busy signal .
Activate voice dialing*
• Press the answer/end button. For best results, record the voice-
dialling tag through your headset . Please consult your phone's
user manual for more information about using this feature .
Redial last number *
• Double Tap the answer/end button when the headset is on and
not used .
Adjust sound and volume *
• Tap the volume up or down to adjust the volume.
Mute/unmute
• To mute, press both volume up and down at the same time.
a low beep alert plays during a muted call .
• To unmute, press both volume up and down at the same time.
Call waiting and placing a call on hold*
this lets you put a call on hold during a conversation and answer
a waiting call .
• Press the answer/end button once to put the active call on hold
and answer the waiting call .
• Press the answer/end button to switch between the two calls.
• Tap the answer/end button to end the active conversation.
* Phone dependent Jabra bt2070
7