Publicité
Les langues disponibles
Les langues disponibles
6. To install the liner panel, it works best if the right side
is placed into the firebox first. See Figure 4. When
installing the liner, some gentle twisting of the liner will
be required. The liner will need to be pushed back into
the corners of the firebox just enough to engage the
right front edge of the liner into the right side retainer
bracket. See Figure 4.
CAUTION:
PILOT/IGNITOR PROBES
TWIST PANEL TO INSTALL
7. Once the right end of the liner is locked into the right
side bracket, continue to work in the left side of the
liner until the complete liner is setting inside the
fireplace. See Figure 5.
8. To complete the liner installation, push the left side of
the liner towards the left rear corner of the fireplace.
Push inward just enough to engage the left end of
the liner into the left side liner bracket. See Figure 5.
The liner edges are held in place by the side brackets.
The forward pressure of the liner keeps the liner in
place, due to the radius rear corners on the liner. See
Figure 5 inset.
Page 2
Figure 4
ONCE THE LINER IS INSIDE THE
FIREPLACE, PUSH ON THE REAR
ROUNDED CORNERS OF THE LINER.
FLEX LINER JUST ENOUGH TO ALLOW
THE FRONT EDGES OF THE LINER TO
ENGAGE THE "V" SHAPED RETAINER
BRACKETS
LINER
LINER BRACKET
Figure 5
Empire Comfort Systems Inc. • Belleville, IL
9. Once both ends of the liner have been securely
positioned and retained, check to see that the liner
is centered left to right. This can be done visually by
check the distance the radius corners are positioned in
relation to the rear corners of the burner screen. See
Figure 6.
10. Replace the Light Cover.
11. Add decorative media as desired.
12. Replace Glass Door and Barrier assemblies.
13. Installation is complete.
Figure 6
35737-2-0220
Publicité
