TECHNICAL MANUAL
LARGE DISPLAYS DN109/NB - DN119/NB - DN189/NB
CHAPTER 22
Network Settings
Parameters related to the connectivity of the display are configured on the network
settings screen:
19. Modifies the name assigned to the display.
20. Sets the DHCP protocol or not.
21. Shows the MAC address.
22. Shows the IP address and allows its changing.
23. Shows the Network mask and allows its changing.
24. Shows the "Gateway" address and allows its changing.
25. Primary DNS. In case DNS is not set correctly, you must configure the SNTP server with
your IP and not with your domain.
26. Secondary DNS.
27. By clicking "UPDATE" the new information is send to display.
IMPORTANT
:
E. These parameters only apply to wired Ethernet. For WIFI, there is a different configuration
available. IPs should not be repeated in order not to have duplication conflicts. The viewer
currently does not warn if this happens.
F. The IP address may be corrupted in case of power loss during storage or if the memory
is damaged. In these cases, the display will automatically reconfigure the emergency IP
address 192.168.1.100.
INITIALIZATION
Fig. 94: Ethernet network settings.
22-7