Display Configuration - Ditel DN109/NB Manuel Technique

TECHNICAL MANUAL
LARGE DISPLAYS DN109/NB - DN119/NB - DN189/NB
CHAPTER 22
IMPORTANT:
If several new devices are received for installation, keep in mind that they will all come
configured with the same IP address. Therefore, prior to its configuration, the IP of some
equipment must be changed individually to avoid duplication of addresses.
When working with several displays it is easy to get confused and configure other than
the desired one, from the set of installed equipment. For this reason, the "Identify Display" function
has been added. Selecting a display from the list of detected devices and clicking this button will
cause it to flash 3 times, allowing you to easily identify which device is going to be configured.

Display Configuration

To configure the display parameters access to the device WEBSERVER.
To do this, connect the display to your local network (or directly to a PC), and using the
"Display Discover" application, select the desired display. By double clicking the selection you go
directly to WEB SERVER.
If you already know the display IP address, you can type it on a WEB BROWSER.
If you want to access the public time servers, you must have an Internet connection.
It is also possible to configure and use the display via WIFI connection. The WIFI
connection has its own IP address.
Below, the different WEBSERVER pages are shown:
INITIALIZATION 22-3