Maintenance; Technical Data; Accessories / Spare Parts - Velp Scientifica VTF Manuel D'instructions

6. Maintenance

No routine or extraordinary maintenance is necessary apart from periodically cleaning the unit as described in this manual.
In compliance with the product guarantee law, repairs to our units must be carried out in our factory, unless previously
agreed otherwise with local distributors. The instrument must be transported in its original packaging and any indications
present on the original packaging must be followed (e.g. palletized).
It is the responsibility of the user, to properly decontaminate the unit in case of hazardous substances remaining on the
surface or interior of the device. If in doubt about the compatibility of a cleaning or decontamination product, contact the
manufacturer or distributor.
Cleaning
Disconnect the unit from the power supply and use a cloth dampened with a mild, non-flammable detergent.

7. Technical data

8. Accessories / Spare parts

A00000001 Derivation element PW10
A00000002 Probe extension cable, length 1m
A00000003 Glass probe
A00000280 Clamp with probe support
40000579 Pt100 probe
40000580 Friction assembled
Power supply
Power
Dimensions (WxHxD)
Weight
Display
Type of thermoregulation
Connector
Level of electrical protection
(CEI EN60529)
Temperature range
Storage temperature range
Max. humidity
Construction material
Temperature setting (interval)
Resolution (precision)
Working time setting
Continuous mode
Remaining time reading
Type of probe
Probe speed τ90%
Immersion depth
12 V (9÷15)
1.2 W
75x145x120 mm
0.250 kg
4 digit LCD, Multi function
Fuzzy Logic
5 pole 270° DIN
IP54
0...+ 50 °C
- 10...+ 60 °C
90 %
Technopolymer
- 10...+ 300 °C
14...572 °F
0.2 °C (± 0.5 °C)
1 °F (± 0.9 °F)
From 0:00 to 24:59 h:min
Possible
Pt100, 250 mm lenght
5 s
15 mm minimum
A00000001 A00000002
8
A00000003 A00000280