VANTRUE Element 1 Mode D'emploi page 26

Note:
Please use a hardwiring kit or other stable and continuous power supply
1.
to power the camera to ensure that the camera works properly in
EN EN
parking mode.
2. The E1 operating environment temperature is 14°F to 158°F (-10°C to
70°C). We recommend selecting Collision Detection within this
temperature range, as it will automatically turn off once the tempera-
ture exceeds the normal operating temperature range. If the tempera-
ture outside is high, turn off the camera when parking.
Time-lapse video recording and parking mode (including collision
3.
detection, motion detection, low bit rate recording, and low framerate
mode) can only be enabled one at a time. When one is enabled, the
other will be automatically disabled.
4. All videos in parking mode(Collison Detection, Motion Detection, Low
Bitrate Recording, Low Framerate mode) will be saved in the normal
folder. In order to prevent the video in parking mode from being
overwritten in a loop, please check and save the required files in time
to prevent loss.
- 22 -