Basic Operation; Menu Settings - VANTRUE Element 1 Mode D'emploi

4. Basic Operation

4.1 Menu Settings

The E1 dash cam has 3 function menus, which are: record settings, system
settings, and file browsing. You can set your dash cam according to your
requirements with these function setting.
Press the
to enter the menu settings.
A. Record Setup
-Resolution: Press the
30FPS; 2560x1440P(HDR) 30FPS; 2560x1440P 30FPS; 1920x1080P 60FPS;
1920x1080P(HDR) 30FPS; 1920x1080P 30FPS; 1280x720P(HDR) 30FPS;
1280x720P 30FPS.
-Loop Recording: Default setting is 3 min. You can choose among 1/3/5
mins and OFF.
-G-Sensor: Select the level of G-sensor you need, then you can set 3
directions (Front + Back/Left + Right/Up + Down). The G-sensor value in
each direction can be selected as 1/2/3/4/5/Off. The higher the sensitivity
level, the easier it is to trigger emergency recording. G-sensor is most
sensitive when set to 5.
-Audio Recording: The default is ON. Set recording to on or off.
-Exposure: The default value is +0.0. Adjust the exposure of the lens.
button, pause the video first, and then press the
Record
Button to switch the resolutions: 2592x1944P
System Files
- 15 -
N E N N E N E E
button