EZiclean Air pure 500i Manuel Utilisateur page 22

Below you will find a summary of the possible sources of malfunction, as well as the troubleshooting procedure to follow:
Problems
The appliance does not start.
Suction does not work.
Lack of filtration performance.
Troubleshooting
Possibilities
The front panel The front panel is not
properly engaged.
The mains plug is not correctly
connected.
The mains plug is not correctly
connected.
The appliance is not placed on a flat
floor.
The plastic wrapping of the filters not
removed.
The filters are saturated.
The dust collector is saturated.
Solutions
Remove and replace the front panel
correctly.
Check that the plug is working
properly.
Check that the plug is working
properly.
Reposition the unit on a flat surface.
Remove all the plastic films that
protect the filters.
Check the condition of the Filters and
clean or change them.
Thoroughly clean the dust collector.