Reset Function; Maintenance Of Your Appliance - EZiclean Air pure 500i Manuel Utilisateur

Maintenance of your appliance

A. CLEANING THE DUST COLLECTOR
Regular maintenance of the dust collector is essential to ensure the proper functioning of your unit. It is recommended to clean it
every 2 months or so.
If the environment in your room is particularly humid, it is possible that micro-droplets of condensation may interfere with
the air quality indicator; your appliance may then switch to maximum power unexpectedly. Clean the sensor so that it works
properly again.
IONS AND ULTRAVIOLET
Press the Function button once to activate the UV function.
Press the Function button a second time to activate the
Ionisation function.
TIMER
Press the Time button to activate the Timer function. The Timer allows you to switch off your
appliance after a period of 1h - 4h - 8h. Scroll through the time selection by pressing the Time
button. This function can be useful to clean a room quickly, by activating the maximum suction
power of the appliance - level 4 - for a short time (1 hour).

RESET FUNCTION

The RESET button has 2 functions:
. Press the RESET button once to activate / deactivate the Halo light of the air quality indicator.
. Press the RESET button for about 5 seconds after a filter change / cleaning procedure.