Cleaning The Pre-Filter - EZiclean Air pure 500i Manuel Utilisateur

Clean the dust collector grille with a
brush.
B. CLEANING THE PRE-FILTER
In order to maintain optimum performance - and based on a usage of the appliance of 8 hours / week - it is recommended to clean
the pre-filter every 2 months.
Remove the front panel of the appliance
and remove the pre-filter.
C. REPLACEMENT OF OTHER FILTERS
In addition to the maintenance of the pre-filter, the following is a reminder of the average life of the other filters used in EZIclean®
Air pure 500i:
. The Charcoal and HEPA filter should be replaced once a year.
. The Photocatalysis filter should be replaced every 3 years. Photocatalysis is based on the principle of activating a semi-conductor
using the energy provided by light, so it is necessary to expose your Photocatalysis Filter to the sun every 6 months for about 2 hours.
Open the access flap
to the dust collector.
Clean the entire surface with a vacuum
cleaner with a hoover.
Clean the sensor with a dry cloth or
cotton swab.
Replace the pre-filter firmly and replace
the front panel.